 |
| Quantity: | |
|---|---|
2 Piece 2 way Stainless Steel Threaded Ball Valve
The 2 piece stainless steel ball valve is probably the most widely used ball valve. The 2 piece ball valve will open or shut off flow on most liquids and gases quickly and easily, it is widely used in petroleum, metallurgy, power fields, typically used for on-off control of water, air, oil, vacuum and other media compatible with the materials of construction where a simple on/off action is needed. Flow rate can also be controlled by partially opening or closing the valve to various degrees. Also referred to as a two-way ball valve, since it allows flow in any direction straight through from inlet to outlet. Being threaded ball valves they are quick to install and easy to use, requiring no tooling for installation. The two piece ball valve is the best priced full port ball valve (full bore), allowing the inside diameter of the pipe to remain constant and unrestricted. This means that the 2 piece SS ball valve has no pressure drop and keeps the flow rate high.
Threaded Ports Female NPT by Female NPT for Easy Connection
Full Port Ball Valve, maximum ID also called Full Bore
Lockable Handle Lever with Blow Out Proof Stem
Pressure Rating up to 1000 PSI Suitable for Most Standard Uses
PTFE Seal and Seat Good for Chemical and High Heat Applications
Sizes Start from 1/4" up to 4"
Product Strength: Durable; Easy to operate; Swift on-off; Low fluid resistance.
Product Feature:
1、Opening and Closing without Friction: It completely solves the problem that the traditional valves are affected by the friciton between the sealing.
2、Top Mounted Structure: Valves installed in pipelines can be directly inspected and maintained online, which can effectively reduce the device stop and cost.
3、Single Valve Seat: It eliminates the problem that the medium in the valve chamber will affect the safety of operation due to abnormal boosting.
4、Low Torque: Due to special structural design of the valve stem, only with a small handle, the valve can be easily opened and closed.
| Size | 1/4" | 3/8" | 1/2" | 3/4" | 1" | 11/4" | 11/2" | 2" | 21/2" | 3" | 4" |
| L | 56 | 56 | 63 | 75 | 86 | 99 | 107 | 122 | 158 | 185 | 220 |
| D | 12 | 12 | 15 | 20 | 25 | 32 | 38 | 49 | 65 | 78 | 100 |
| H | 50 | 50 | 55 | 65 | 75 | 80 | 90 | 100 | 130 | 145 | 161 |
| E | 90 | 90 | 110 | 110 | 145 | 145 | 190 | 190 | 220 | 245 | 325 |
| B | 26 | 26 | 26 | 32.5 | 47.2 | 47.2 | 55 | 68 | 83 | 102 | 121 |
2 Piece 2 way Stainless Steel Threaded Ball Valve
The 2 piece stainless steel ball valve is probably the most widely used ball valve. The 2 piece ball valve will open or shut off flow on most liquids and gases quickly and easily, it is widely used in petroleum, metallurgy, power fields, typically used for on-off control of water, air, oil, vacuum and other media compatible with the materials of construction where a simple on/off action is needed. Flow rate can also be controlled by partially opening or closing the valve to various degrees. Also referred to as a two-way ball valve, since it allows flow in any direction straight through from inlet to outlet. Being threaded ball valves they are quick to install and easy to use, requiring no tooling for installation. The two piece ball valve is the best priced full port ball valve (full bore), allowing the inside diameter of the pipe to remain constant and unrestricted. This means that the 2 piece SS ball valve has no pressure drop and keeps the flow rate high.
Threaded Ports Female NPT by Female NPT for Easy Connection
Full Port Ball Valve, maximum ID also called Full Bore
Lockable Handle Lever with Blow Out Proof Stem
Pressure Rating up to 1000 PSI Suitable for Most Standard Uses
PTFE Seal and Seat Good for Chemical and High Heat Applications
Sizes Start from 1/4" up to 4"
Product Strength: Durable; Easy to operate; Swift on-off; Low fluid resistance.
Product Feature:
1、Opening and Closing without Friction: It completely solves the problem that the traditional valves are affected by the friciton between the sealing.
2、Top Mounted Structure: Valves installed in pipelines can be directly inspected and maintained online, which can effectively reduce the device stop and cost.
3、Single Valve Seat: It eliminates the problem that the medium in the valve chamber will affect the safety of operation due to abnormal boosting.
4、Low Torque: Due to special structural design of the valve stem, only with a small handle, the valve can be easily opened and closed.
| Size | 1/4" | 3/8" | 1/2" | 3/4" | 1" | 11/4" | 11/2" | 2" | 21/2" | 3" | 4" |
| L | 56 | 56 | 63 | 75 | 86 | 99 | 107 | 122 | 158 | 185 | 220 |
| D | 12 | 12 | 15 | 20 | 25 | 32 | 38 | 49 | 65 | 78 | 100 |
| H | 50 | 50 | 55 | 65 | 75 | 80 | 90 | 100 | 130 | 145 | 161 |
| E | 90 | 90 | 110 | 110 | 145 | 145 | 190 | 190 | 220 | 245 | 325 |
| B | 26 | 26 | 26 | 32.5 | 47.2 | 47.2 | 55 | 68 | 83 | 102 | 121 |
